August 21, 2003, Collinsville, IL
The purpose of the workshop is to present important technical information and review production and construction aspects for a new type of backfill material for trenches and other excavations, as well as for filling abandoned underground pipes, tunnels, etc. Flowable Slurry (Controlled Low Strength Materials, or CLSM) is a low-strength concrete-like material that is made from one or more of the materials such as coal ash, fine crushed sand, used foundry sand, crushed glass, wood ash, regular concrete sand, water, and some portland cement. Flowable slurry can be designed for future excavation. The strength of this material can vary from 50 psi to 1200 psi at the age of 28 days. Numerous municipalities, state highway departments, and engineers are specifying flowable slurry increasingly for many applications.
The workshop will present case histories of successful installations. Technical information will be presented on mixture design, mechanical properties, construction applications, and environmental regulations. A construction demonstration of slurry placement will also be presented. Handout materials will be provided. The workshop should be of interest to those associated with building design, engineers, architects, engineering technicians, engineers working in governmental agencies, industry and private practice, engineering faculty and students, as well as ready mixed concrete producers, sand and coarse aggregates suppliers, and contractors. Knowledgeable professionals engaged in specifying, approving, producing, marketing, and using flowable slurry will present state-of-the-art information.
Registration (Continental Breakfast Included)
Francois Botha, Project Manager, Illinois Clean Coal Institute, Carterville, Illinois
Anthony A. Konsky, Asset Manager Director, Business Development, Ameren Energy & Fuel Services, St. Louis, MO
What is flowable slurry? - Engineering properties and mixture proportions of flowable slurry (a.k.a. CLSM) made with coal ash, case histories, and construction applications.|
Tarun R. Naik
Break (refreshments included)
Field applications of flowable slurry in backfilling of excavations, trenches, and underground voids. Effect of mixture proportions on setting characteristics, placement, testing, field performance, economy, and marketing.|
Bruce W. Ramme
Illinois EPA and Illinois DOT Requirements.|
Tarun R. Naik
Flowable Slurry Placement Demonstration and Questions and Answers|
Ken Highlander, Ready-Mix Service, Inc. and Tarun R. Naik
Tarun R. Naik, Ph. D., P. E., FACI
Director, UWM Center for By-Products Utilization, Milwaukee, Wisconsin
Dr. Naik has over 35 years of experience with cement, aggregates, and concrete. His contribution in teaching and research has been well recognized nationally and internationally. His research has resulted in over 250 technical reports and papers in ACI, ASCE, ASTM, etc. He is a member of ACI, ASCE, ASEE, ASTM, RILEM, NSPE, and WSPE. He is a member of technical committees of ACI, ASCE, ASTM, and RILEM. He has served as a president of WI-ACI, WSPE, and other organizations.
Bruce W. Ramme, P.E.
Manager, Environmental Department-Land Quality, We Energies, Milwaukee, Wisconsin
Mr. Ramme has worked for over 20 years at We Energies and has worked to help achieve over 100% utilization of We Energies coal combustion products in 2002. He is a member of ACI, ASCE, NSPE, and other professional organizations. He was chairman of ACI Committee 229 on CLSM; and ACI 213B on By-Product Lightweight Aggregate, and a member of other technical committees of ACI. He is also a past-president of the Wisconsin Chapter of ACI and the Southeast Branch of the Wisconsin Section of ASCE.