Research Papers and Published Reports
|
| Title | Report Number | Author(s) | Date | Presented/Published |
|---|---|---|---|---|
| Use of Post-Consumer Waste Plastics in Cement-Based Composites |
CBU-1996-01 (REP-251) |
Tarun R. Naik Shiw S. Singh Calvin O. Huber Brian Broderson | March 1996 | Accepted for Publication in Cement and Concrete Research, Pergamon Press, Oct. 1996. |
| Influence of Fly Ash Inclusion on Microstructure and Strength Properties of Concrete |
CBU-1996-02 (REP-159) |
Tarun R. Naik Shiw S. Sing Marcelle Gillot | March 1996 | A CBU Report |
| Resistance of High-Performance Concrete to Chloride Ion Penetration |
CBU-1996-03 (REP-243) |
Tarun R. Naik Fred Gustin Shiw S. Singh | March 1996 | For Presentation and Publication at the ACI International Conference, Kuala Lumpur, Malaysia, December 1997.Published in SP-172, ACI, Dec. 1999, pp. 899-918. |
| Use of Post-consumer Plastics in Cement-Based Composites |
CBU-1996-04 (REP-280) |
Tarun R. Naik Shiw S. Singh Calvin Huber Brian Brodersen | March 1996 | Published in Cement and Concrete Research, Vol. 26, No. 10, Pergamon Press, Oct. 1996, pp. 1489-1492. |
| Mechanical and Durability Properties of Concrete Made with Blended Ash |
CBU-1996-05 (REP-268A) |
Tarun R. Naik Shiw S. Singh Bruce W. Ramme | March 1996 | Presented and Preprint Published at the Fourth CANMET/ACI International Conference on Durability of Concrete, Sydney, Australia, August 17-22, 1997 |
| Mechanical Properties and Durability of Concrete Made With Blended Fly Ash | CBU-1996-05.1 |
Tarun R. Naik Shiw S. Singh Bruce W. Ramme | April 1996 | Published in ACI Materials Journal, Vol. 95, No. 4, Jul.-Aug. 1998, pp. 454-462. |
| Effect of Source and Amount of Fly Ash on Mechanical and Durability Properties of Concrete |
CBU-1996-06 (REP-282) |
Tarun R. Naik Shiw S. Singh Bruce W. Ramme | May 1996 | Presented and Published at the Fourth CANMET/ACI International Conference on Durability of Concrete, Sydney, Australia, August 17-22, 1997, SP-170, ACI, pp. 157-188. |
| Use of Class F Fly Ash and Clean-Coal Ash Blends for Cast Concrete Products |
CBU-1996-07 (REP-283) |
Tarun R. Naik Daniel Banerjee Rudolph N. Kraus Shiw S. Singh Bruce W. Ramme | July 1996 | Presented and Published at the ACAA Twelfth International Coal Ash Use Symposium, Orlando, Florida, January 26-30, 1997. |
| Characterization and Application of Class F Fly Ash Coal and Clean-Coal Ash for Cement-Based Materials |
CBU-1996-08 (REP-284) |
Tarun R. Naik Daniel Banerjee Rudolph N. Kraus Shiw S. Singh Bruce W. Ramme | July 1996 | Presented and Published at the ACAA Twelfth International Coal Ash Use Symposium, Orlando, Florida, January 26-30, 1997. |
| Permeability of Flowable Slurry Materials Conatining Foundry Sand and Fly Ash |
CBU-1996-09 (REP-261.1) |
Tarun R. Naik Shiw S. Singh | May 1995 | Published in Journal of Geotechnical and Geoenvironmental Engineering, Vol. 123, No. 5, ASCE, May 1997, pp. 446-452. |
| Flowable Slurry Containing Foundry Sands | CBU-1996-10 |
Tarun R. Naik Shiw S. Singh | November 1995 | Published in Journal of Materials in Civil Engineering, Vol. 9, No. 2, ASCE, May 1997, pp. 93-102. |
| Development of Controlled Low-Strength Materials ("Manufacturing Dirt") Utilizing Manitowoc Pumlic Utilities Ash: Phase 1 to Phase 5 Report |
CBU-1996- 11 (REP-277) |
Rudolph N. Kraus Tarun R. Naik | February 1996 | A Final Report Submitted to Manitowoc Public Utilities. |
| Pulliam Unit-5 and Unit-8 Coal Fly Ash: Chcaracterization Options |
CBU-1996-12 (REP-278) |
Tarun R. Naik Rudolph N. Kraus Shiw S. Singh | February 1996 | A Final Report Submitted to the Wisconsin Public Service Corporation. |
| Controlled Low Strength Materials (CLSM) State-of-the-Art-New Innovations |
CBU-1996-13 (REP-456) |
Tarun R. Naik Bruce W. Ramme | August 1997 | Presented and Published at the Third CANMET /ACI International Symposium on Advances in Concrete Technology Auckland, New Zealand, August 24-27, 1997. |
| Additional Data for ICCI Project No. 94-1/3.1 A-8, Low-Cost, High Performance Materials Using Illinois Coal combustion By-Products |
CBU-1996-14 (REP-285) |
Tarun R. Naik Rudolph N. Kraus Shiw S. Singh | May 1996 | A CBU Report |
| Blended Cement Research at CBU |
CBU-1996-15 (REP-289) | Tarun R. Naik | August 1996 | A CBU Report. |
| Fly Ash Generation and Utilization – An Overview |
CBU-1996-16 (REP-290) |
Tarun R. Naik Shiw S. Singh | September 1996 | A CBU Report |
| Use of Superplasticizers in HVFA Concretes for Industrial Park Roads with Minimum Life Cycle Costs |
CBU-1996-17 (REP-291) |
John Tews Tarun R. Naik Bruce W. Ramme Shiw S. Singh | August 1996 | A CBU Report |
| Roller Compacted No-Fines Concrete Containing Fly Ash for Road Base Course |
CBU-1996-18 (REP-293) |
Tarun R. Naik Bruce W. Ramme | September 1996 | Presented and Published at the Third CANMET /ACI International Symposium on Advances in Concrete Technology Auckland, New Zealand, August 24-27, 1997. |
| Curing Temperature Effects on Strength and Durability of High-Performance Concrete |
CBU-1996-19 (REP-295) and (REP-327) |
Tarun R. Naik Shiw S. Singh William Olson John Beffel | October 1996 | A CBU Report. |
About Us Seminars Research News Resources Links Projects Reports Contact Us Employment Home