University of Wisconsin-Milwaukee

Powerful Ideas | Proven Results

Schedule of Classes

Summer 2019Term 2196  
ContentsOther SemestersPAWSAdvanced Search

Art and Design
Department Office: Art 203, 414-229-4947
Chair: Christine Woywood, MIT 371B

IMPORTANT REGISTRATION INFORMATION

Note: Any student enrolled in a studio course who does not attend the first class without having previously notified the instructor may, at the discretion of the instructor, be dropped.

Attention Graphic Design Majors: The Graphic Design sub-major has undergone Program changes in the last few years. New students intending to major in Graphic Design should check the online Undergraduate Bulletin (http://www.uwm.edu/ugbulletin/SC/S_SOA.html) for the most recent requirements. Current majors in the program should speak to a Peck School of the Arts advisor (THR Bldg 120) or ask a Graphic Design faculty member if they have questions or are unsure of which set of programmatic policies and prerequisites apply to them.

ART COURSES ARE CLOSED TO AUDITORS.

ART MAJORS FOLLOWED BY ART MINORS WILL HAVE PRIORITY REGISTRATION FOR COURSES REQUIRED IN THE MAJOR.

Click on section number/link for any special information/fees/requirements for that class.

All Inter-Arts traditional track majors (excluding Interdisciplinary Arts & Technology and Musical Theatre) must meet with their academic advisor in the Peck School of the Arts Student Services Office prior to registration. A registration hold will be placed on the students record until an academic advising session is held. Upon completion of the advising session, the registration hold will be removed. Call 414-229-4763 to make an appointment to see your Peck School of the Arts academic advisor.

It is strongly recommended that all students have health insurance that includes emergency room and hospitalization coverage. The UWM Student Association offers a Student Health Insurance Plan http://www4.uwm.edu/studentorg/sa/executive/student_health_insurance.cfm which covers most major medical illnesses or injuries. The University does not provide blanket medical coverage to students. Students are strongly encouraged to secure their own health insurance, either through their parents, the Student Health Insurance Plan or some other program.

Please note: DIFFERENTIAL TUITION, applied regardless of the credit plateau, for all students enrolled in most undergraduate courses offered through the degree programs within the UW-Milwaukee Peck School of the Arts beginning in the Fall 2004 semester. Eight 100-level General Education Requirement (GER) courses do not carry the differential: Music 100, Music 101, Music 102, Art 100, Art 105, Art 106, Art 124, and Theatre 100.The differential tuition rate will be set at $21.80 per credit during this academic year. Additional tuition enhances the quality of education in the Peck School of the Arts.
Courses - Expand Subject


ART-150: Multicultural America (3 units; U ; A,CD; FEE)

Cross-cultural study of U.S. ethnic and racial identities through materials drawn from a variety of media arts practices (e.g. film, photography, new media) with attention to African-, Asian-, Hispanic- and Native American experiences.

Notes:
Cultures and Communities Prog course; req'd service learning component. Jointly offered with & counts as repeat of Film 150. Prereq: none.
Not open to University Special Students

GER   Units Section Class# Hours Days Dates Instructor Room Syllabus
A,CD (FEE) 3 LAB 291
60377 - 06/24-07/20 Johnston, Tamara ONLINE WEB  
On-line classes have OPTIONAL service learning.
ENROLLMENT OPEN TO UNIVERSITY SPECIAL STUDENTS.
Add'l Special Course Fee of $275.00 will be charged for this lab in addition to regular UWM tuition. Conducted completely online.Windows or OSX computer and Internet access required.

ART-279: Jewelry and Metalsmithing Workshop: (1 - 3 units; U ; FEE)

Special topics workshop in jewelry and metalsmithing.

Notes:
May be retaken w/chg in topic to 6 cr max. Prereq: see Schedule of Classes.
Not open to University Special Students

GER   Units Section Class# Hours Days Dates Instructor Room Syllabus
3D Sculpting and CNC Mold Making
  (FEE) 1 LAB 501
60395 9:00 AM-4:00 PM MTWRF 06/17-06/22   KSE 375  
Also meets in KSE 368 and KSE B61.
This week long workshop will introduce 3D sculpting using programs such as MeshMixer and Sculptris to create organic, freeform models. Patterns and molds will then be generated using a CNC router, 3D printer and vacuum former. Final objects will then be made using slip casting, clay, pouring plaster and ABS or PLA plastics.
Special Course Fee: $35.00
Audit never allowed.
Laser Etched Powder Coat Finishes
  (FEE) 1 LAB 805
67551 9:00 AM-4:00 PM MTWRF 06/24-06/29 Bridgewater, Chad KSE 375  
Also meets in KSE 368 and KSE B61
Special Course Fee: $35.00
This one week long workshop will focus on powder coating a variety of metals such as aluminum, brass and steel. Once cured a laser cutter will be used to selectively remove linear patterns in the powder coat. Additional techniques include light soldering, etching, cutting, drilling, filing and buffing.
Audit never allowed.
Blacksmithing
  (FEE) 1 LAB 806
67552 9:00 AM-4:00 PM MTWRF 08/05-08/10 Hawk, Adam KSE B61  
Also meets in KSE 368.
Special course fee: $35.00.
This one-week workshop is an introduction to the fundamentals of blacksmithing. Demonstrations and information about punching, tapering, bending, heat treating, upsetting, chisel work, cold connections and other techniques will be followed by lots of hands-on time. At the end of the week all participants will leave with their very own hand forged coat rack/pot rack and/or kitchen utensil (fork, spoon, ladle).
Audit never allowed.

ART-297: Study Abroad: (1 - 12 units; U )

Studio and special problems designed to provide relevant course work for a study abroad in the visual arts.

Notes:
May be retaken with topic change. Prereq: admis to Art and Design Prog; acceptance in Study Abroad Prog.
Not open to University Special Students

GER   Units Section Class# Hours Days Dates Instructor Room Syllabus
The Book as Object & Artifact
    3 LAB 102
67510 - 06/26-07/27   OFF CAMPUS  
Italy trip dates: June 26 - July 27, 2019. Contact CIE Study Abroad Office, Garland 138, 229-4846.
Audit never allowed.
Sculpture: The Medium is the Message
    3 LAB 103
67511 - 06/26-07/27   OFF CAMPUS  
Italy trip dates: June 26 - July 27, 2019. Contact CIE Study Abroad Office, Garland 138, 229-4846.
Audit never allowed.
Drawing in the Expanded Field
    3 LAB 104
67512 - 06/26-07/27   OFF CAMPUS  
Italy trip dates: June 26 - July 27, 2019. Contact CIE Study Abroad Office, Garland 138, 229-4846.
Audit never allowed.
Renaissance Painting Techniques
    3 LAB 105
67513 - 06/26-07/27   OFF CAMPUS  
Italy trip dates: June 26 - July 27, 2019. Contact CIE Study Abroad Office, Garland 138, 229-4846.
Audit never allowed.
Discovering Florence Through Photography
    3 LAB 106
67514 - 06/26-07/27   OFF CAMPUS  
Italy trip dates: June 26 - July 27, 2019. Contact CIE Study Abroad Office, Garland 138, 229-4846.
Audit never allowed.
Fashion Illustration I
    3 LAB 107
67515 - 06/26-07/27   OFF CAMPUS  
Italy trip dates: June 26 - July 27, 2019. Contact CIE Study Abroad Office, Garland 138, 229-4846.
Audit never allowed.
Italian Fashion Industry
    3 LAB 108
67516 - 06/26-07/27   OFF CAMPUS  
Italy trip dates: June 26 - July 27, 2019. Contact CIE Study Abroad Office, Garland 138, 229-4846.
Audit never allowed.
Luxury Fashion
    3 LAB 109
67517 - 06/26-07/27   OFF CAMPUS  
Italy trip dates: June 26 - July 27, 2019. Contact CIE Study Abroad Office, Garland 138, 229-4846.
Audit never allowed.
Trends Forecasting for Fashion Design
    3 LAB 110
67518 - 06/26-07/27   OFF CAMPUS  
Italy trip dates: June 26 - July 27, 2019. Contact CIE Study Abroad Office, Garland 138, 229-4846.
Audit never allowed.
Interior Design "Small Spaces" Studio
    3 LAB 111
67519 - 06/26-07/27   OFF CAMPUS  
Italy trip dates: June 26 - July 27, 2019. Contact CIE Study Abroad Office, Garland 138, 229-4846.
Audit never allowed.
Place Based Learning & Art Education
    3 LAB 112
67557 - 06/26-07/27 Woywod Veettil, Christine OFF CAMPUS  
Italy trip dates: June 26 - July 27, 2019. Contact CIE Study Abroad Office, Garland 138, 229-4846.
Audit never allowed.
    1 - 12 LAB 901
60388 - 06/24-08/17   TBA  
For tuition/fee purposes this section meets during the 8 week 1 session.
Audit never allowed.

ART-302: Art and Design Workshop: (3 units; U/G ; FEE)

Special topic course in Art and Design.

Notes:
May be retaken with topic change to 6 cr max. Prereq: jr st, & admis to Art and Design prog or to IAT; or grad st.

GER   Units Section Class# Hours Days Dates Instructor Room Syllabus
3D Imaging
  (FEE) 3 LAB 801
67592 9:00 AM-1:45 PM MTWR 07/22-08/17 Willey, Christopher LECWC 211  
Audit never allowed.

ART-309: Issues in Contemporary Art: (3 units; U ; A,CD; FEE)

Lecture course focused on critical issues/theory in contemporary art and culture.

Notes:
May be retaken w/chg in topic to 6 cr max. Prereq: soph st or cons instr.

GER   Units Section Class# Hours Days Dates Instructor Room Syllabus
Artists and Social Movements
A,CD (FEE) 3 LEC 291
60381 - 05/28-07/06 Lampert, Nicolas ONLINE WEB  
PREREQUISTITES NOT ENFORCED THIS TERM.
Open to non-art and pre-art students.
Add'l Special Course Fee of $275.00 will be charged for this lab in addition to regular UWM tuition. Conducted completely on-line. Internet/Computer access req'd.
Audit never allowed.

ART-317: 3D Imaging I (3 units; U/G ; FEE)

An introduction to 3D imaging techniques and applications.

Notes:
Prereq: jr st; admis to Art and Design prog or Inter-Arts/IAT prog; grad st; or cons instr.
Not open to University Special Students

GER   Units Section Class# Hours Days Dates Instructor Room Syllabus
  (FEE) 3 LAB 801
60384 9:00 AM-1:45 PM MTWR 07/22-08/17 Willey, Christopher LECWC 211  
PREREQUISITES NOT ENFORCED THIS TERM.
Laptop Requirement: Mac OS X 10.9.x, 10.10.x and 10.11.x, Windows 7, Windows 8 and Windows 10 (64-bit only). System Requirements: Intel processor(s), Core i3 or higher. 10 GB disk space available for full content installation; At least 4 GB RAM; Display with 1280 x 800 pixel resolution.
Audit never allowed.

ART-479: Jewelry and Metalsmithing Workshop: (1 - 3 units; U/G ; FEE)

Special topics workshop in jewelry and metalsmithing.

Notes:
May be retaken w/chg in topic to 6 cr. max. Prereq: jr st, & Admis to Art and Design prog, & Art 271(P); or grad st & cons instr.
Not open to University Special Students

GER   Units Section Class# Hours Days Dates Instructor Room Syllabus
3D Sculpting and CNC Mold Making
  (FEE) 1 LAB 501
60396 9:00 AM-4:00 PM MTWRF 06/17-06/22   KSE 375  
This week long workshop will introduce 3D sculpting using programs such as MeshMixer and Sculptris to create organic, freeform models. Patterns and molds will then be generated using a CNC router, 3D printer and vacuum former. Final objects will then be made using slip casting, clay, pouring plaster and ABS or PLA plastics.
Special Course Fee: $35.00
Audit never allowed.
Laser Etched Powder Coat Finishes
  (FEE) 1 LAB 805
67553 9:00 AM-4:00 PM MTWRF 06/24-06/29 Bridgewater, Chad KSE 375  
Special course fee: $35.00
This one week long workshop will focus on powder coating a variety of metals such as aluminum, brass and steel. Once cured a laser cutter will be used to selectively remove linear patterns in the powder coat. Additional techniques include light soldering, etching, cutting, drilling, filing and buffing.
Audit never allowed.
Blacksmithing
  (FEE) 1 LAB 806
67554 9:00 AM-4:00 PM MTWRF 08/05-08/10 Hawk, Adam KSE B61  
Also meets in KSE 368.
Special Course Fee: $35.00
This one-week workshop is an introduction to the fundamentals of blacksmithing. Demonstrations and information about punching, tapering, bending, heat treating, upsetting, chisel work, cold connections and other techniques will be followed by lots of hands-on time. At the end of the week all participants will leave with their very own hand forged coat rack/pot rack and/or kitchen utensil (fork, spoon, ladle).
Audit never allowed.

ART-497: Study Abroad: (1 - 12 units; U/G )

Studio and special problems designed to provide relevant course work for a study abroad program in the visual arts.

Notes:
May be retaken w/chg in topic to max of 12 cr. Prereq: jr st; acceptance in Study Abroad Prog.

GER   Units Section Class# Hours Days Dates Instructor Room Syllabus
Place Based Learning & Art Education
    3 LAB 112
67558 - 06/26-07/27 Woywod Veettil, Christine OFF CAMPUS  
Italy trip dates: June 26 - July 27, 2019. Contact CIE Study Abroad Office, Garland 138, 229-4846.
Audit never allowed.
    1 - 12 LAB 901
60376 - 06/24-08/17   TBA  
For registration & fee purposes, this section meets during the 8-week session. Contact CIE Overseas Programs, Garland Hall 138, 414-229-4846.
Audit never allowed.
Korean & Japanese Paper Craft Studies
    1 - 12 LAB 904
60409 - 05/28-06/15 Meuninck Ganger, Jessica TBA  
Part 1 of Korean & Japan trip info: May 30 - June 16, 2018. Contact CIE Study Abroad Office, Garland 138, 229-4846.
Audit never allowed.
Korean & Japanese Paper Craft Studies 2
    1 - 12 LAB 905
60410 - 07/08-07/13 Meuninck Ganger, Jessica TBA  
PART 2 of Korean & Japan trip info: classes held at UWM July 9 - July 13, 2018. Contact CIE Study Abroad Office, Garland 138, 229-4846.
Audit never allowed.

ART-603: Advanced Studio Practice (1 - 3 units; U/G ; FEE)

A special course open only to seniors and graduate students with written cons instr.

Notes:
May be retaken to max of 3 cr. Prereq: sr st; writ cons instr.

GER   Units Section Class# Hours Days Dates Instructor Room Syllabus
  (FEE) 1 - 3 IND 001
67580 - 06/10-08/17 Grame, Robert TBA  
Additional Tuition $21.80/cr.
May be retaken to max of 3 cr. Prereq: sr st; writ cons instr.
Audit never allowed.
  (FEE) 1 - 3 IND 002
67629 - 06/10-07/20 Decker, Amy TBA  
Audit never allowed.

ART-608: Art and Design Internship (3 - 6 units; U/G ; FEE)

Provides structured opportunities for art students to earn credit for skills and professional experience gained working in galleries, museums, studios, arts organizations or art businesses.

Notes:
May be retaken to 6 cr max. Prereq: jr st & admis to Art and Design prog; or grad st & cons instr.

GER   Units Section Class# Hours Days Dates Instructor Room Syllabus
  (FEE) 3 - 6 FLD 001
60387 - 07/08-08/17 Decker, Amy TBA  
Audit never allowed.

University of Wisconsin-Milwaukee
P.O. Box 413, 2200 E. Kenwood Blvd.
Milwaukee, WI 53201-0413
(414) 229-1122